DOORS TO FLOORS

The doors in this room are of the six panel colonel variety. They are made up of six raised panels, three "stiles" and six "rails".

The doors are set into frames that consists of a "jamb"( pronounced "jam") there is also  a strip of molding that stops the door when closing it called, you guessed it , a "doorstop", and the molding that surrounds the frame is collectively called the "casing".                                                 
                  
                         six panel colonel door
For the purposes of painting I have simplified the "rail" anatomy to four. This will make the painting sequence easier to follow.
How To Paint It

The three doors in this room all open from other differently colored rooms of the house. The question is:
"Where do I properly divide the colors on the door and frame?"
Here is a simple way to determine the dividing points.
Standing in the room that is being painted, open the door about half swing, now, stand back a few feet and basically what you see is what you paint. This trick works regardless of which way the door swings.

This door opens into our room so the break points will be as follows:
Paint the edge of the door that holds the lock bolt and the face of the door, do not paint the hinge edge.

The frame is painted from the outside edge of the casing around to, and including the facing edge of the door stop.
             
                           
                         
Let's paint this door.

First loosen the two screws on the door knob about a half inch or so and pull the knob toward you. This will give us painting access around the knob and the lock should still work. Dust off the door. Load the brush much the same way we did  while painting windows, with one difference, omit raking the bristles across the rim of the pot while painting these larger areas. Paint all the panels, starting with the top panels and working downward to the bottom panels. Lap the paint slightly over the outside edges of the panels onto the face of the door.

Next, paint the vertical center "stile" from the top of the door to the bottom. Now paint all four horizontal "rails" making sure that the paint extends into the outside "stiles".

Next in line is the vertical "stile" closest to the hinges, followed by the door edge (where the lock bolt is located). Finally, paint the vertical "stile" that holds the door knob.


 See Illustrations on next pages 
                                                 
INDEX
greetings
frankenstein
prepwork
mudd
wallpaper
woodwork
caulk talk
prime time
brushing up
what where
window tips
doors floors
door painting
cabinet woes
rolling on
rolling on illustrated
finishing up
special products
so long
Our Forums
next page> <previous page

Painting Contractor Supply
Copyright 2007 painterforum.com
Painting Frankenstein
by Roger Woodward
posted courtesy of

www.painterforum.com

About the Author
Roger Woodward is a painting contractor with over twenty five years in the Painting Trade. Over the years R. Woodward & Co. has established a reputation for high quality workmanship, honesty and fairness. Roger's professional and sometimes innovative approach to the house painting craft has garnered him the respect of his fellow Craftsmen and provided a customer loyalty that is seldom seen. Roger is also the Founder and Publisher of Painter Forum,  an outstanding free home painting resource for DIY and professional house painters.
Copyright & Disclaimer
"Painting Frankenstein"
title and book contents are the property of Roger Woodward Copyright 1997-2007. All Rights are reserved.
Disclaimer:
The purpose of this book is to provide practical guidelines for your painting project. The use of this book is at your own risk. Neither Roger Woodward nor any of his websites, subsidiaries, divisions, affiliates, agents, representatives or licensors,  shall be liable to you or anyone else for any loss or injury to person or property, or any direct, indirect, incidental, consequential, special or punitive damages arising out of your use or non use of information available in this book. Always follow all project and product safety instructions and guidelines provided by the product manufacturers. Failure to do so can result in serious injury. 

BUY THE PAPERBACK