Poll

What do you mostly put through your airless rig?

Only oil based paints
Only water based paints
I switch between the two on the same rig
I have two rigs, one for each

Author Topic: AIRLESS PAINTERS POLL  (Read 17392 times)

Offline Mr Edd

  • Jr. Member
  • **
  • Posts: 13
  • The Famous Mr Edd
Re: AIRLESS PAINTERS POLL
« Reply #15 on: September 18, 2009, 04:06:11 AM »
I am new to this forum so a bit behind with this topic.  Just thought I would add my 2c's worth for posterity.

I have a Greco Ultra 400 which is now over 20 years old. I bought it in Oz and often would switch from water base to oil including clear polyurethane.  As long as you clean the filters out it was fine.  When the job was finished I would clean thoroughly with water and then pump some heating oil in for storage.

I haven't had a lot of use for it in the UK since we came back but I do find that most paints in the UK are not designed for spraying, to much fall out for my liking, especially with oil base paints.

I used it once (here in the UK) on three new builds, the guys I was working with were gobsmacked at how fast it was but didn't like it as they thinking was I was taking work off them.  A little smalled minded for me.  If the OP comes back I would be interested in what reaction he gets here in the UK.

Edd
I'd be dyslexic if I could spell ti

Offline Splash22

  • Jr. Member
  • **
  • Posts: 6
Re: AIRLESS PAINTERS POLL
« Reply #16 on: September 24, 2009, 04:16:43 PM »
I use my Spray Tech for cabinets, bookcases and certain trim paks in oil and my 2 Graco's for the rest. I used to keep seperate filters and extra hoses for oil jobs ( from throw away equipment from my buddy at the Porter store) and change them out for oil but my guys in their laziness wouldn't always swap out for the change in product, so I got the Spray Tech at SW and its only used for oil and poly.
Every time I close the door on reality
 it comes in thru the windows..............