House Painter Forum

Professional Painters => Professional Painters and associated Trades Forum => The Good, The Bad & The Ugly => Topic started by: ProWallGuy on June 25, 2010, 05:55:23 PM

Title: More tough material
Post by: ProWallGuy on June 25, 2010, 05:55:23 PM
So, I haven't been posting much because I hooked up with a new designer last December and she is been keeping me very busy. This is a good thing, but the problem is one of her favorite materials to spec is some very thick, heavy, tough vinyl. I posted about it here:

http://www.painterforum.com/yabbse/index.php/topic,2277.0.html

I am more familiar with it now, so I charge big to install it. It still kicks my a55 though.

Here it is again, I installed it on a 17' high accent wall at the home of an ex-wife of one of the StL Cardinals. Apparently she got most of the money, and the house.  ;D

Had to rig up a 6' baker scaffold to reach the area. OSHA approved?

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG002.jpg)

Then stuck an 8' stepper on top of that. Still OSHA approved? Not sure, but my knees were knocking all day and it took about 8 beers later to "unpucker."

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG008.jpg)

This stuff is so heavy when pasted that I had to unfurl it very gently because if it shifted, it could have bucked me right off the ladder.

Title: Re: More tough material
Post by: ProWallGuy on June 25, 2010, 05:56:20 PM
The finished wall:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG016.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG011.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG027.jpg)
Title: Re: More tough material
Post by: ProWallGuy on June 25, 2010, 05:58:30 PM
The seams are a major hassle to cut. It is like trying to do a successful double-cut through 2 layers of carpet. My blade finger was raw, and my propane torch got a work out too. Some close-ups of a seam:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG022.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG025.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG026.jpg)
Title: Re: More tough material
Post by: chrisn on June 26, 2010, 04:55:58 AM
 Apparently she got most of the money, and the house.

Yea, life for her is a bi%ch, she still ended up with more than both of us combined will ever earn in our lifetime and then some.


Seams? what seams?

Nice ;D
Title: Re: More tough material
Post by: Roadog on June 26, 2010, 08:20:18 AM
Looks like a pain but I like the way it looks.
  I have pipe frame "bakers"....the lightweight pipe staging, 30 in wide, that take standard 7 ft decks. Stacks nice. Have 2, 6 ft frames and one 5 ft, jack screws for those 2x4 replacements and outriggers. Safety rails too. Lets me work up to about 25 feet easy. Almost have to have it for new home foyers!
Title: Re: More tough material
Post by: the PAINTSMITH on June 26, 2010, 09:00:03 AM
OSHA approved?

 Not sure, but my knees were knocking all day and it took about 8 beers later to "unpucker."



I've done the ladderonascaffold trick many many times. You never get used to it.

Go to the OSHA website, they'll tell you that NOTHING is approved. They have a habit of making up their own rules as they go, the printed stuff just a clever diversion.

Did you determine the acoustic effects of that material? I'm at the point in my recording studio where acoustic treatments are being considered. Auralex is great, but they are WAY too proud of their foam panels...
Title: Re: More tough material
Post by: jdmccann on July 02, 2010, 03:15:08 PM
That chequers pattern again I love...  so this is the same stuff you used at the Hamptons job??  And its vinyl you say?  Lincrusta do a covering identical.  Dunno the difference over their costwise but I imagine it'd be easier to hang.  Not to say you haven't done a good job... I'm as impressed as ever!
Title: Re: More tough material
Post by: Straight Edge Painting on March 19, 2015, 04:11:50 PM
Looks good my brother.  I wish I knew how to install that stuff.  Are you giving lessons? lol

Straight Edge Painting LLC
Home Painter (http://www.straightedgepaintingllc.com)
Title: More tough material
Post by: Aaronbar on September 17, 2017, 06:53:50 PM
Also that we would do without your magnificent phrase
Title: Re: More tough material
Post by: RichardParker on November 29, 2017, 01:18:03 AM
The finished wall:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG016.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG011.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordWG027.jpg)

It looks just amazing!