House Painter Forum

Professional Painters => Professional Painters and associated Trades Forum => The Good, The Bad & The Ugly => Topic started by: ProWallGuy on June 25, 2010, 06:03:26 PM

Title: BLING!
Post by: ProWallGuy on June 25, 2010, 06:03:26 PM
More cool material I have installed recently. This too is in the home of the Cardinals ex-wife.

The material is Beaddazzled Geode by Maya Romanoff. Color is Caviar.

The bar to be covered:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR001.jpg)

The material:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR012.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR015.jpg)
Title: Re: BLING!
Post by: ProWallGuy on June 25, 2010, 06:05:27 PM
Bar is primed and ready to go:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR018.jpg)

Cutting the panel:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR032.jpg)

Pasting the surface:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR026.jpg)

Pasting the material:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR028.jpg)

Title: Re: BLING!
Post by: ProWallGuy on June 25, 2010, 06:06:43 PM
Setting the panel in place:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR029.jpg)

Putting panel into position:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR030.jpg)

Chasing out bubbles with a soft roller:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR031.jpg)
Title: Re: BLING!
Post by: ProWallGuy on June 25, 2010, 06:11:26 PM
The finished bar:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR044.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR039.jpg)

Turn on the flash for some bling:

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR060.jpg)

(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR047.jpg)
(http://i60.photobucket.com/albums/h10/prowallguy/job%20pics/LankfordMR057.jpg)
Title: Re: BLING!
Post by: Hangman on June 25, 2010, 08:44:27 PM
The outside corners look good and tight, did you heat them?
Title: Re: BLING!
Post by: rmichael on June 25, 2010, 09:26:27 PM
wow, I've never seen 40 grit floor sandpaper used that way.  :D  JK - Great job as usual Tim.,  :)
Title: Re: BLING!
Post by: ProWallGuy on June 25, 2010, 10:00:11 PM
The outside corners look good and tight, did you heat them?
No, I cut them to size and placed them on the wall. Since the backing was black, a fine tip sharpie filled in the couple spots where a bead fell off.
Title: Re: BLING!
Post by: PaintingDenver on July 01, 2010, 02:23:27 AM
Nice work! 
Title: Re: BLING!
Post by: jdmccann on July 02, 2010, 03:10:20 PM
LOVE those Romanoff papers!!!  Great job again!
Title: Re: BLING!
Post by: ProWallGuy on July 04, 2010, 08:27:41 AM
Thanks! Do you get to see/install many Romanoff products in the UK?
Title: Re: BLING!
Post by: jdmccann on July 04, 2010, 11:22:27 AM
I'm sure they're about... probably down in London.  Personally I've never used them.  Would love to though.  Most papers I hang are basic off the shelf types.  Nowhere near as satisfying but I gotta pay the bills
Title: Re: BLING!
Post by: jdmccann on July 05, 2010, 06:10:36 PM
Any downlighters on the underside of that bar??? Think that'd look awesome!
Title: Re: BLING!
Post by: ProWallGuy on July 05, 2010, 06:14:23 PM
Funny you said that. I mentioned the same thing to the designer, and she is going to find some of those thin flexible tubes with neon in them to string up underneath it.

Title: Re: BLING!
Post by: jdmccann on July 06, 2010, 11:53:11 AM
 8) And this professional designer hadn't thought of that?  I'm in the wrong game...
Title: Re: BLING!
Post by: DCW on August 04, 2010, 02:10:31 AM
Very nice!!